In Riverside, metal roofing prices typically range from $5.50 to $20 per square foot for installation, while repairs often start around $450, depending on the specific service. Factors like roof size, material choice, accessibility, and the condition of your existing roof all influence the final cost, so we provide transparent starting prices to help you plan with confidence.
Pricing guide
These rates are indicative. Every job is unique: size, access, complexity. Request a free estimate for exact pricing tailored to your situation.
| Service | Price | Details |
|---|---|---|
| Metal Roof Installation | From $8/sq ft | Complete metal roof installation for homes across Riverside and the Inland Empire: panel systems engineered for 100-degree heat, intense UV and Santa Ana winds, installed over high-temperature synthetic underlayment with proper ventilation, correct flashing and manufacturer-approved details for a 40-60 year service life. |
| Standing Seam Metal Roofing | From $10/sq ft | Concealed-fastener standing seam systems, the premium choice for Riverside homes. Panels roll-formed to length and mechanically seamed or snap-locked, with no exposed screws to loosen as valley heat expands and contracts the roof every day. Superior wind resistance and a cool reflective finish. |
| Metal Roof Replacement | From $9/sq ft | Full tear-off and replacement of sun-baked shingle, cracked tile or end-of-life metal roofs: old roofing hauled away, decking inspected and repaired, then a complete new metal system installed. Class A fire-rated metal is a smart upgrade near the hills. |
| Metal Roof Over Shingles (Retrofit) | From $7/sq ft | A new metal roof installed directly over your existing asphalt shingles: no tear-off, less waste, lower cost. Popular on Riverside's 1950s-70s ranch tracts. We check deck condition first and tell you honestly when tear-off is the better call. |
| Metal Roof Repair | From $450 | Repair of damaged, loose or wind-lifted metal roofing: replacing dented or punctured panels, resealing seams and penetrations, and fixing failed flashing before a winter storm becomes interior damage. |
| Metal Roof Leak Repair | From $450 | Priority leak response for metal roofs: leaks traced to their true source (failed fasteners, seam separation, flashing gaps, pipe boots and stucco-wall transitions) and fixed right, not just caulked over. Emergency tarping available before and after winter storms. |
| Screw Replacement & Re-Fastening | From $750 | Riverside's 100-degree days and cool nights expand and contract metal roofs hundreds of times a year, so screws back out and UV-baked washers crack on older exposed-fastener roofs. Oversized screws and UV-resistant washers fix it for a fraction of replacement cost. |
| Corrugated & Ribbed Panel Roofing | From $5.50/sq ft | Exposed-fastener metal roofing (corrugated, R-panel and 5V): the budget-friendly workhorse for patio covers, garages, horse barns and workshops across Riverside County. Quality panels in reflective cool-roof colors, installed with proper screw patterns and closures that keep out wind-blown dust. |
| Metal Shingle Roofing | From $9/sq ft | Metal shingles that deliver the look of architectural shingles, slate or shake with the lifespan of steel: a favorite for Riverside homeowners who want metal performance without the standing seam look. Lightweight, walkable and wind-rated for Santa Ana gusts. |
| Stone-Coated Steel Roofing | From $9/sq ft | Stone-coated steel systems combining steel strength with a textured traditional finish: excellent wind performance, Class A fire rating for ember season, and profiles that mimic the Spanish clay tile and shake looks common on Riverside homes. |
| Copper & Specialty Metal Roofing | From $20/sq ft | Copper, zinc and aluminum roofing for accents, porches, bay windows and full architectural roofs: premium metals that develop a living patina and last a century. Custom fabrication for the fine details on Wood Streets Craftsman homes and Mission Revival entries. |
| Metal Roof Coating & Painting | From $2.50/sq ft | Restoration of sun-faded, chalking or surface-rusted metal roofs: surface prep, rust treatment and high-performance reflective coating systems that extend roof life 10-15 years, restore color and cut summer heat gain without replacement. |
| Flashing, Chimney & Skylight Repair | From $600 | Repair and custom fabrication of flashing around chimneys, skylights, valleys, dormers and stucco transitions: the number one leak point on Riverside roofs when winter rain finally arrives. In-house bent flashing for a precise watertight fit. |
| Snow Guards & Ice Protection | From $1,200 | Wind-uplift edge and ridge protection for metal roofs: Riverside never gets snow on the valley floor, so this is about Santa Ana wind. Reinforced eave, rake and ridge fastening, extra clips and sealed edge trim for exposed hillside homes, with honest guidance on whether your roof needs it. |
| Storm & Wind Damage Repair | Free inspection | Repair of wind, rain and ember damage to metal roofing after Santa Ana wind events and winter storms: thorough documentation with photos, honest assessment of repair vs. replacement, and help documenting your insurance claim from inspection to completed work. |
| Metal Roof Inspection | Free estimate | Complete metal roof inspections for homeowners, buyers and insurance requirements: fastener condition, seam integrity, flashing, coating and UV wear, and a straight answer on remaining service life with a written report. |
| Gutters for Metal Roofs | From $9/linear ft | Seamless gutter systems sized and mounted correctly for metal roofing: hangers that work with panel profiles and downspouts that carry short, heavy winter downpours away from stucco walls and foundations, with details that handle eucalyptus leaves and palm debris. |
| Commercial & Agricultural Metal Roofing | Free estimate | Metal roofing for barns, horse stables, workshops, churches, carports, warehouses and light commercial buildings across Riverside County, from Norco's horse properties and old citrus-grove outbuildings to the logistics buildings of the Inland Empire, with durable panel systems, insulation options and repairs. |
What Affects the Price
- Roof size and complexity : Larger roofs require more materials and labor, and complex designs with multiple slopes, valleys, or penetrations increase installation time and cost.
- Material type and gauge : Standing seam, corrugated panels, stone-coated steel, and copper vary significantly in price per square foot, with thicker gauges and premium finishes costing more.
- Accessibility and roof height : Steep roofs, multi-story homes, or limited access can require additional safety measures and equipment, adding to labor costs.
- Existing roof condition and removal : If removal of old roofing is needed, or if underlying decking requires repair, this adds to the overall project cost.
What's included
- Travel included across the Riverside area
- Professional labor & equipment
- Old roofing tear-off & haul-away
- Job site cleanup
- Written estimate before work begins
To get an accurate estimate, have your roof dimensions, material preferences, and any known issues ready before calling. A Riverside Metal Roofing estimate includes a thorough inspection, a detailed breakdown of materials and labor, and a clear timeline. Call (951) 783-4287 to schedule your free estimate and discuss your project.
Pricing FAQ
Why do metal roofing prices vary so much?
Prices vary based on material type (e.g., corrugated panels vs. copper), roof complexity, accessibility, and whether removal of the old roof is required. Each factor affects labor and material costs, so we provide a detailed estimate tailored to your specific situation.
Do you offer free estimates?
Yes, we offer free inspections and estimates for most services. Call (951) 783-4287 to schedule an appointment at your convenience.
What payment methods do you accept?
We accept cash, checks, and major credit cards. Financing options may be available for larger projects; please ask for details when you call.