Serving the Riverside area  ·  (951) 783-4287  ·  Open Mon-Sun 7am-7pm
📞 (951) 783-4287 Free Quote

Metal Roofing in San Bernardino, CA (92405) · Local Professionals

Riverside Metal Roofing · Fast response in San Bernardino and the Riverside area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+311Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

San Bernardino, especially around ZIP 92405, is a city of older ranch tracts and hillside edges that take a beating from the summer sun and foothill winds. The housing stock here is mostly 1950s to 1970s stucco ranches with low-pitched shingle, shake, and flat concrete tile roofs, plus a growing number of homes near the base of the San Bernardino Mountains that see serious wind and sun exposure. If you live near Perris Hill Park or along the older streets off Highland Avenue, you know exactly how fast a cheap roof fails when the heat cranks past 100 degrees.

Homeowners in 92405 call Riverside Metal Roofing because we understand this city's specific roof killers: UV that cracks sealant and dries out shingles, Santa Ana winds that lift loose edges, and winter storms that find every failed flashing. We are based in Riverside and serve San Bernardino and the surrounding areas, and we bring fully insured crews who have worked on everything from small ranch homes to commercial and agricultural metal roofs. Whether you are near San Bernardino Valley College or out toward the foothills, we know the local building stock and the common failure points.

Metal Roofing in San Bernardino (92405)

San Bernardino sits in the Santa Ana River valley at the foot of the San Bernardino Mountains, and that geography drives the roofing challenges here. On the flats, older ranch homes often have low-slope roofs with minimal attic ventilation, which traps heat and cooks shingles from underneath. Toward the hillside edges and canyons, wind exposure is higher, and we routinely see lifted panels, missing fasteners, and torn flashing after a strong Santa Ana event. The soil here also moves with our dry-wet cycles, which can shift foundations slightly and open up gaps at flashing and penetrations. Tight lot access is common in the older neighborhoods, so we plan material staging carefully to avoid damaging fences, driveways, or landscaping.

Our team has been serving San Bernardino and the Riverside area for years, and we have seen every kind of roof failure this climate can produce. We know that a metal roof over shingles (retrofit) is often the most practical choice for a 1950s ranch, and we know when a full tear-off is the safer call. We also handle the specific demands of hillside homes, including snow guards and ice protection for the higher elevations, even though snow never falls on the valley floor.

Our services in San Bernardino

How a Job Works in San Bernardino

Step 1: You call us at (951) 783-4287 or request a free estimate online. We schedule an on-site assessment at your San Bernardino property, and we inspect the roof, attic, flashing, and drainage. We take photos, measure the roof, and talk with you about what we find. You get a written estimate with clear pricing, not a high-pressure sales pitch.

Step 2: Once you approve the scope, we pull the required roofing permit from the City of San Bernardino (or the relevant jurisdiction) and schedule the work. For homes in historic districts or HOAs, we help you understand any design review requirements before we order materials. On tight lots, we stage materials in the driveway or street per city rules and protect your landscaping. Our crews are fully insured and trained on standing seam, corrugated panels, stone-coated steel, and metal shingles, so we match the right system to your roof pitch and style.

Step 3: When the job is done, we clean the site thoroughly, including magnet sweeps for nails and fasteners. We walk the roof with you, show you the finished work, and explain any maintenance items. We leave your property clean and your roof ready for the next Santa Ana wind.

Pricing for metal roofing in San Bernardino depends on the size and complexity of your roof, access, the condition of the existing roof, and the material you choose. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. If you are retrofitting over existing shingles, metal roof over shingles starts at $7 per square foot. Repairs start at $450, screw replacement and re-fastening at $750, and flashing, chimney, or skylight repair at $600. Coating and painting start at $2.50 per square foot, and gutters for metal roofs start at $9 per linear foot. For a free estimate on your San Bernardino home, call (951) 783-4287. We will give you a realistic number based on your actual roof, not a teaser rate.

My 1950s ranch near Perris Hill Park has a low-pitched shingle roof. Can you install metal over it, and will it hold up to the summer heat?
Yes, a metal roof over shingles (retrofit) is often a good fit for low-pitch ranch roofs, but we first check the existing roof deck and framing to make sure it can handle the added weight and that the shingles are not too deteriorated. We also verify local code limits on the number of existing layers. For San Bernardino heat, we recommend a reflective metal system, such as standing seam or stone-coated steel, with proper attic ventilation to reduce heat buildup. We will inspect your roof and give you a clear recommendation.
A Santa Ana wind storm just peeled back some panels on my roof in San Bernardino. How fast can you respond?
We treat wind damage as a priority, especially when panels are lifted or missing and rain is in the forecast. Call us at (951) 783-4287, and we will schedule an inspection as soon as possible, often within 24 to 48 hours depending on storm volume. We can tarp or secure the area to prevent further damage, then provide a written repair estimate. We document everything for your insurance claim, but coverage and deductibles are determined by your policy.
What is a realistic cost for a metal roof replacement on a typical 1,500-square-foot ranch home in 92405?
For a 1,500-square-foot ranch with a simple gable roof, a metal roof replacement might range from roughly $13,500 to $18,000 depending on the material, access, and whether we need to repair sheathing or flashing. Standing seam costs more than corrugated panels, and complex roof lines or tight lot access can add to the labor. We provide a free on-site estimate so you get a number that reflects your actual roof, not a generic average.
Do I need a permit from the City of San Bernardino to replace my roof, and how long does it take?
Yes, a roofing permit is commonly required for a full replacement or re-roof in San Bernardino, and the requirements can vary depending on the scope and whether your home is in a historic district. We handle the permit application and inspections as part of the job. Timing depends on the city's workload, but we schedule work to avoid delays. Always verify current rules with the city building department, as requirements can change.
My HOA requires a specific roof color and profile. Can you help with approval, and what about the property line with my neighbor?
We work with HOAs regularly and can provide material samples, color chips, and specification sheets for your architectural review. We recommend getting written HOA approval before ordering materials. For property lines, we stay within your property and coordinate with neighbors if access is needed. If there is a dispute about the property line, we defer to your survey and the city's rules. We never put materials or equipment on a neighbor's property without permission.
Are you fully insured for roofing work at my San Bernardino home?
Yes, we are fully insured, carrying both general liability and workers' compensation coverage. This protects you and your property in case of an accident on the job. We are happy to answer any questions about our coverage before we start work.
How should I maintain a metal roof in San Bernardino to handle the summer heat and winter storms?
In San Bernardino, the main maintenance items are keeping debris out of valleys and gutters, checking fasteners and sealant annually, and touching up any scratches or coating wear. Before the rainy season, we recommend a professional inspection to check flashing at chimneys, skylights, and walls. After a Santa Ana wind event, look for lifted panels or loose screws. A simple annual inspection can catch small issues before they become leaks. We offer free estimates for inspections.
Why choose us?

Trusted professionals in Riverside

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Riverside

All your work handled by qualified professionals in Riverside

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

311+ Verified Client Reviews in Riverside

⭐⭐⭐⭐⭐ 4.9/5 · 311 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Riverside · Response within 24h · No commitment · ☎ (951) 783-4287

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Riverside ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm