Serving the Riverside area  ·  (951) 783-4287  ·  Open Mon-Sun 7am-7pm
📞 (951) 783-4287 Free Quote

Metal Roofing in Perris, CA (92571) · Local Professionals

Riverside Metal Roofing · Fast response in Perris and the Riverside area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+311Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Perris is a city of wide-open spaces and fast-growing neighborhoods, where ranch properties with horse lots and metal barns sit just south of the 215 freeway, and newer tract homes in areas like May Ranch and the streets off Perris Boulevard face the same relentless sun and wind as the old citrus groves. The housing stock here ranges from 1980s and 1990s stucco homes with concrete tile roofs to brand-new construction, all baking under 100-degree summers and dry Santa Ana winds that test every roof.

Homeowners in Perris (92571) call Riverside Metal Roofing because we understand the local conditions: metal roofs here need to reflect heat, resist wind uplift, and handle the occasional heavy winter rain that finds every failed flashing. Whether you are near the Perris Valley Airport or out toward Lake Perris, we bring fully insured crews and a straightforward approach to metal roofing.

Metal Roofing in Perris (92571)

Perris sits in a valley where the ground can be sandy or clay-heavy, and properties often have large lots with outbuildings, barns, and shops. The open terrain means wind exposure is real, especially on the south and west sides of town where the Santa Ana winds funnel through. Many homes have low-pitched roofs that were originally shingled or tiled, and over time the intense UV and heat cause sealants to fail and fasteners to back out. We see a lot of wind-lifted panels and ridge caps after fall wind events, and active leaks around chimneys and skylights after winter storms. Our team is experienced with the local building department requirements for re-roofs and can help you navigate permits, especially if your home is in an HOA that has design review for roof color and profile.

We have been serving Perris and the surrounding Riverside area for years, and we know the neighborhoods from the established tracts near the Perris High School to the newer developments off Ethanac Road. Our crews are fully insured and trained to handle everything from standing seam installation to coating and repair on existing metal roofs.

Our services in Perris

How a Job Works in Perris

Step 1: You call us at (951) 783-4287 or request a free estimate online. We schedule an on-site assessment at your Perris property, where we inspect your current roof, check for leaks, loose fasteners, and flashing issues, and discuss your options. We provide a written estimate with clear pricing and no pressure.

Step 2: Once you approve, we handle the permitting with the city of Perris and coordinate with your HOA if needed. On the scheduled day, our crew arrives with materials and equipment. For tight lots or steep grades, we plan access carefully to avoid damage to landscaping. We protect your property and work efficiently, keeping you informed of progress.

Step 3: After the work is complete, we clean up thoroughly, haul away all debris, and do a final walkthrough with you to ensure everything meets your expectations. We leave your property clean and your new metal roof ready to protect your home for decades.

Pricing for metal roofing in Perris depends on the scope of work, roof size, access, and material choice. For a typical 1,500 to 2,000 square foot home, metal roof installation starts around $8 per square foot, while standing seam runs about $10 per square foot. If you are replacing an existing roof, expect starting prices around $9 per square foot, and retrofitting over shingles starts at $7 per square foot. Repairs, such as fixing a leak or replacing flashing, start at $450, and screw replacement or re-fastening starts at $750. Coating and painting can extend the life of an existing metal roof for about $2.50 per square foot. We always provide a free estimate tailored to your specific property, so call (951) 783-4287 to get started.

My house is in the May Ranch area and we get strong winds off the open fields. Will a metal roof hold up better than shingles?
Yes. Metal roofs, especially standing seam with concealed fasteners, are much more resistant to wind uplift than shingles. We use wind-rated panels and secure them according to local codes, which is important in open areas like May Ranch where gusts can be strong. We also inspect and reinforce flashing and edges to prevent wind-driven rain intrusion.
A storm just blew some panels loose on my barn near Lake Perris. Can you handle emergency repairs?
Absolutely. We offer storm and wind damage repair with free inspections. Call us at (951) 783-4287 and we will schedule a prompt assessment. Our team can secure loose panels, replace damaged ones, and make temporary repairs if needed to prevent further damage.
What is the typical cost for a metal roof replacement on a 2,000 square foot home in Perris?
For a 2,000 square foot home, a metal roof replacement typically starts around $9 per square foot, so you are looking at roughly $18,000 and up depending on the material, roof complexity, and whether we remove the old roof. Standing seam or stone-coated steel may be higher. We provide a detailed free estimate after inspecting your property.
Do I need a permit to replace my roof in Perris, and can you help with that?
Yes, roofing permits are generally required for a full replacement or re-roof in Perris, and requirements can vary. We handle the permitting process for you, including submitting plans and coordinating inspections with the city building department. We will ensure your project meets all local codes.
My HOA requires approval for roof color. Can you provide samples and documentation for the architectural review?
Yes, we can provide material samples, color chips, and product specifications to submit to your HOA. We are familiar with HOA design review processes in Perris and can help you choose a profile and color that meets the guidelines while giving you the durability of metal.
Are you fully insured for work on my property?
Yes, we are fully insured with general liability and workers' compensation coverage.
What maintenance does a metal roof need in Perris to handle the heat and wind?
We recommend an annual inspection to check for loose fasteners, sealant deterioration, and debris buildup, especially after windy seasons. Coating your metal roof every 10 to 15 years can also help reflect heat and extend its life. Our team can perform inspections and maintenance to keep your roof in top shape.
Why choose us?

Trusted professionals in Riverside

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Riverside

All your work handled by qualified professionals in Riverside

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

311+ Verified Client Reviews in Riverside

⭐⭐⭐⭐⭐ 4.9/5 · 311 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Riverside · Response within 24h · No commitment · ☎ (951) 783-4287

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Riverside ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm