Serving the Riverside area  ·  (951) 783-4287  ·  Open Mon-Sun 7am-7pm
📞 (951) 783-4287 Free Quote

Metal Roofing in Redlands, CA (92374) · Local Professionals

Riverside Metal Roofing · Fast response in Redlands and the Riverside area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+311Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Redlands is a city of citrus groves turned neighborhoods, where the housing stock is as varied as the terrain. From the historic Victorians and Craftsman bungalows near Downtown and the Wood Streets to the mid-century ranches and newer stucco homes out toward the 92374 ZIP code, every roof has its own story. If you live near the Redlands Bowl or along the palm-lined streets off Citrus Avenue, you know the sun bakes shingles and the Santa Ana winds test every seam.

Homeowners in Redlands call Riverside Metal Roofing because we understand the local challenges: intense summer heat, dry winds, and the occasional heavy winter storm that finds every flashing gap. We are based in Riverside, just a short drive away, and we know the neighborhoods, the permits, and the specific needs of Redlands properties. Whether you are in a historic home near the University of Redlands or a ranch house in the Crafton area, we have the experience to get the job done right.

Metal Roofing in Redlands (92374)

Redlands sits at the foot of the San Bernardino Mountains, and that geography matters. The city's older neighborhoods, like the Wood Streets and Downtown, feature Craftsman bungalows and Mission Revival homes with complex rooflines, multiple gables, and delicate flashing details that require careful craftsmanship. Many of these homes still have original clay tile or worn shingles, and upgrading to metal means addressing structural support and matching historic aesthetics. In newer areas like the 92374 ZIP code, you will find two-story stucco homes with concrete tile roofs that are prime candidates for a metal retrofit. The terrain varies from flat lots near the citrus groves to sloped properties in the foothills, and access can be tight in older neighborhoods with narrow driveways and mature trees. Our team is experienced with tight lot access, historic district considerations, and the specific drainage patterns of the area. We also serve the surrounding Riverside area, including neighborhoods like Arlington Heights and the University of Redlands area.

Our experience serving Redlands and the Riverside area means we understand the local building department requirements, the HOA design review processes, and the common failure points of roofs in this climate. We have worked on everything from small repairs to full replacements, and we know how to handle the unique challenges that Redlands properties present.

Our services in Redlands

How a Job Works in Redlands

Step 1: The first step is a free on-site assessment. We will come to your Redlands property, inspect your current roof, and discuss your options. We will check for leaks, damaged flashing, and any structural issues, and we will provide a written estimate with clear pricing. We will also review any permit requirements with the City of Redlands and help you understand the process.

Step 2: Once you approve the estimate, we schedule the work. Our crew arrives on time, protects your landscaping and driveway, and gets to work. In Redlands, we often deal with tight access in older neighborhoods, so we plan ahead for material delivery and staging. If your home is in a historic district or HOA, we coordinate with the necessary parties to ensure compliance. We also pull the required permits and schedule inspections as needed.

Step 3: After the work is complete, we clean up thoroughly, removing all debris and materials. We walk the property with you to ensure you are satisfied, and we provide a final inspection report. We leave your property clean and your new roof ready to protect your home for decades.

Pricing for metal roofing in Redlands depends on several factors: the size and complexity of your roof, the material you choose, the condition of the existing roof, and access. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. For repairs, such as fixing a leak or replacing fasteners, costs start around $450. We also offer metal roof over shingles (retrofit) starting at $7 per square foot, which can be a cost-effective option for some homes. For a free estimate tailored to your Redlands property, call us at (951) 783-4287.

My Redlands home is in a historic district near Downtown. Can I still install a metal roof?
Yes, but you will likely need to go through a design review process. The City of Redlands has historic preservation guidelines that may restrict panel profiles and colors. We can help you choose a metal roof that meets those requirements and guide you through the approval process. We have experience working with historic homes in the Wood Streets and Downtown areas.
How quickly can you respond to storm damage in Redlands?
We offer free inspections for storm and wind damage. If a storm has damaged your roof, call us at (951) 783-4287, and we will schedule an inspection as soon as possible. Our team is local and can often respond within 24 to 48 hours, depending on demand. We will assess the damage, provide a repair estimate, and help with insurance documentation if needed.
What is the typical cost to replace a roof on a 1,500-square-foot home in Redlands?
For a 1,500-square-foot home, a metal roof replacement might range from $13,500 to $20,000, depending on the material and complexity. Standing seam or stone-coated steel will be at the higher end. We provide free estimates so you can get an accurate price for your specific roof.
Do I need a permit to replace my roof in Redlands?
Yes, the City of Redlands typically requires a permit for roof replacements. The requirements and fees vary, so we recommend checking with the local building department. We can handle the permitting process for you and ensure all inspections are completed.
My HOA requires approval for a new roof. Can you help with that?
Yes, we can provide the necessary documentation, such as material samples and specifications, for your HOA submission. We are familiar with many HOAs in Redlands and can help you navigate the approval process. We will also ensure that your new roof complies with any HOA rules regarding color and style.
Are you fully insured for roofing work in Redlands?
Yes, we are fully insured with general liability and workers' compensation coverage. Your property is protected when you work with us.
What maintenance does a metal roof need in Redlands' climate?
In Redlands, metal roofs benefit from annual inspections, especially after the Santa Ana winds and winter rains. Check for loose fasteners, debris in gutters, and any signs of sealant wear. We offer maintenance plans and inspections to keep your roof in top shape.
Why choose us?

Trusted professionals in Riverside

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Riverside

All your work handled by qualified professionals in Riverside

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

311+ Verified Client Reviews in Riverside

⭐⭐⭐⭐⭐ 4.9/5 · 311 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Riverside · Response within 24h · No commitment · ☎ (951) 783-4287

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Riverside ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm