Serving the Riverside area  ·  (951) 783-4287  ·  Open Mon-Sun 7am-7pm
📞 (951) 783-4287 Free Quote

Metal Roofing in Colton, CA (92313) · Local Professionals

Riverside Metal Roofing · Fast response in Colton and the Riverside area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+311Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Colton is a rail town at heart, and you can see it in the housing stock: 1920s bungalows near the old depot, post-war stucco ranches out toward Grand Terrace, and metal barns and shops on the big lots south of the 10. The sun here bakes roofs year-round, and the Santa Ana winds come through in the fall looking for loose panels and dried-out sealant.

We are Riverside Metal Roofing, based just up the road in Riverside, and we work Colton (92313) regularly. Whether you are in a Craftsman near Cooley Ranch or managing a warehouse off Slover Avenue, we know what the heat and wind do to a roof here, and we fix it without a sales pitch.

Metal Roofing in Colton (92313)

Colton sits in the Santa Ana River valley at the foot of the Box Springs Mountains, and that geography drives the work. The valley floor gets brutally hot in summer, often over 100 degrees for days at a time, which cooks asphalt shingles and dries out sealant around fasteners and flashing. Fall brings dry Santa Ana winds that lift ridge caps and peel back panels that were not fastened correctly. Winter storms are short but heavy, and they find every gap. We see a lot of failed fasteners on older metal roofs, separated seams on barns and shops, and flashing gaps around chimneys and skylights on the older bungalows near downtown. The housing mix is wide: 1900s Craftsman bungalows with steep pitches, 1950s and 60s low-slope ranch tracts, and a growing number of homeowners switching to standing seam or stone-coated steel to reflect heat and resist embers from the brush hills. Lot sizes vary from tight downtown parcels to larger agricultural properties, so access and staging change from job to job. We have worked in Colton and the surrounding Riverside area long enough to know which neighborhoods need a careful touch and which ones just need a solid, honest roof.

Our services in Colton

How a Job Works in Colton

Step 1: You call us at (951) 783-4287 or request a free estimate online. We schedule an on-site assessment, walk the roof, check the attic if accessible, and look at flashing, fasteners, and drainage. You get a written scope and a clear price before any work starts.

Step 2: Once you approve, we pull the permits required by the city of Colton and coordinate any HOA or historic review if your property is in a designated area. On tight downtown lots we plan material staging carefully, and on larger properties we make sure equipment access does not tear up the ground. Our insured crews handle the installation or repair, and we keep you posted on progress.

Step 3: We clean up thoroughly, haul away old material, and walk the finished job with you. We do not leave until you have seen the work and signed off. If something needs a follow-up, we come back.

Pricing in Colton depends on the size and pitch of your roof, access, the condition of the existing decking, and how urgent the job is. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and a retrofit over existing shingles at $7. Corrugated and ribbed panel roofing starts at $5.50, stone-coated steel and metal shingle at $9, and copper or specialty metal at $20. Repairs start at $450, leak repair at $450, screw replacement and re-fastening at $750, and flashing, chimney, or skylight repair at $600. Metal roof coating and painting starts at $2.50 per square foot, and gutters run from $9 per linear foot. We give free estimates and free inspections, so call (951) 783-4287 and we will give you a real number for your Colton property.

My 1920s bungalow near downtown Colton has original skip sheathing. Can you install metal over it?
We can, but we need to inspect it first. Skip sheathing is common on older Colton homes, and if the boards are sound we can often install a solid substrate over them before the metal. If they are dry-rotted or cupped, we replace them. We will tell you exactly what we find during the free inspection.
A windstorm peeled back panels on my shop roof near Slover Avenue. How fast can you get out?
We prioritize active leaks and storm damage. Call (951) 783-4287 and we will schedule an inspection as soon as possible, often within a day or two. We can tarp or secure the area to prevent further damage while we prepare a repair plan and estimate.
What does a typical metal roof replacement cost for a 1,500 square foot ranch house in Colton?
For a basic corrugated or ribbed panel roof, you might be looking at roughly $8,000 to $12,000 depending on pitch, access, and whether we need to replace decking. Standing seam or stone-coated steel runs higher. We give free estimates so you get an exact figure for your roof, not a guess.
Do I need a permit from the city of Colton to replace my roof?
Yes, a full replacement or re-roof typically requires a permit from the city of Colton Building Department. Requirements and fees vary, and we handle the permitting process for you. We always defer to the local building department for the final word on what is required for your specific property.
My HOA requires a specific roof color. Can you work with that?
Yes. We regularly coordinate with HOAs and can provide color samples and product literature for approval. If your home is in a historic district, there may be additional design review, and we will help you navigate that before ordering materials.
Are you fully insured for work at my Colton property?
Yes. We carry general liability insurance and workers' compensation coverage for every job.
What maintenance should I do on my metal roof in Colton to prevent problems from the heat and wind?
Inspect fasteners and sealant every fall before the Santa Ana winds arrive. Look for loose screws, dried caulk around flashing, and any panels that have lifted. A yearly inspection and minor re-fastening can prevent most leaks. We offer free inspections and can set up a maintenance plan if you want.
Why choose us?

Trusted professionals in Riverside

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Riverside

All your work handled by qualified professionals in Riverside

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

311+ Verified Client Reviews in Riverside

⭐⭐⭐⭐⭐ 4.9/5 · 311 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Riverside · Response within 24h · No commitment · ☎ (951) 783-4287

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Riverside ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm