Serving the Riverside area  ·  (951) 783-4287  ·  Open Mon-Sun 7am-7pm
📞 (951) 783-4287 Free Quote

Metal Roofing in Highland, CA (92346) · Local Professionals

Riverside Metal Roofing · Fast response in Highland and the Riverside area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+311Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Highland sits right at the foot of the San Bernardino Mountains, where the flat valley floor starts tilting up toward the foothills and the brush gets thick and dry by August. A lot of the homes along Base Line and up toward Greenspot are ranch-style places on half-acre lots, many with metal barns or shops out back, and the roofs take a beating from sun, wind, and the embers that drift down off the slopes.

We're Riverside Metal Roofing, and Highland is one of our regular stops. Whether you're in a 1950s ranch off Palm Avenue or a newer two-story near East Highland Park, we know how the heat and the Santa Ana winds work on a roof here, and we show up ready to fix it right.

Metal Roofing in Highland (92346)

Highland is a mix of older ranch homes, horse properties, and newer tracts, and the terrain changes fast. Down on the flats, lots are wide and access is easy, but up toward the foothills the grade gets steep, driveways get long, and some back yards back right up to the brush. That means two things for roofing: first, ember exposure is real, especially on the north and east sides of town where the wildland edge is close, and second, getting materials and crews to the roof can take some planning. We've worked plenty of properties where the only way to stage a dumpster is at the top of the drive, and we plan for that before we start. The soil here also moves with the wet and dry cycles, so we pay close attention to flashing details at wall intersections and around chimneys, because that's where leaks show up first.

Our team has been installing, repairing, and replacing metal roofs across the Inland Empire for years, and Highland is a regular part of our service area. We've seen what the summer heat does to sealants and fasteners, and we've replaced plenty of wind-lifted panels after a fall Santa Ana event.

Our services in Highland

How a Job Works in Highland

Step 1: You call us at (951) 783-4287 or send a message, and we set up a free on-site assessment. We'll get up on the roof, check the fasteners, seams, flashing, and attic side if we can, and give you a straight answer on what's needed. If it's a repair, we'll tell you. If it's a replacement, we'll explain why.

Step 2: Once you approve the scope, we handle the permit paperwork with the City of Highland and get on the schedule. On tighter lots or properties with steep drives, we plan material delivery and staging ahead of time so we're not blocking your neighbors or tearing up the landscaping. If your home is in an HOA, we'll coordinate the color and profile approval before anything gets ordered.

Step 3: When the work is done, we walk the property with you, clean up every nail and scrap, and make sure you know how to reach us if anything comes up later. We leave your place clean and your roof ready for the next Santa Ana wind.

Pricing in Highland depends on the size and pitch of your roof, how easy it is to access, and what condition the deck and flashing are in. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and a retrofit over existing shingles at $7. Repairs start at $450, and a full re-fastening job runs from $750. Stone-coated steel and metal shingle roofs start at $9 per square foot. We give free estimates, so call (951) 783-4287 and we'll take a look and give you a real number, not a guess.

My house backs up to the brush near the foothills in Highland. Does a metal roof actually help with ember protection?
Yes, it does. Metal won't catch a spark the way wood shake or dried-out shingles can, and embers tend to bounce off a smooth standing seam or stone-coated steel surface instead of lodging in it. That said, the roof is only part of the defense. We also look at your vents, eaves, and flashing gaps, because those are common spots where embers get in. If you're in one of the neighborhoods near the wildland edge, we can walk the roof and point out the weak spots.
A windstorm peeled back some panels on my roof last fall. How fast can you get out to Highland?
We prioritize active leaks and storm damage. Call us at (951) 783-4287 and describe what you're seeing. If panels are lifted or missing, we'll get someone out to secure the area and stop water from getting in, then schedule the permanent repair. We keep common panel profiles and fasteners on hand so we're not waiting on a special order for a basic fix.
What does a typical metal roof replacement cost for a 1,500 square foot ranch house in Highland?
For a simple gable ranch with good access, you're generally looking at somewhere between $12,000 and $18,000 for a basic corrugated or ribbed panel system, and more for standing seam. The big variables are roof pitch, how many layers of old shingles need to come off, and whether there's any dry rot in the deck. We give free estimates, so the only way to know for sure is to have us out.
Do I need a permit from the City of Highland to replace my roof?
In most cases, yes. A full re-roof or replacement typically requires a permit, and the city will inspect the work. The rules on how many layers of old roofing you can leave in place also vary, so it's best to check with the City of Highland Building Department before you plan the job. We handle the permit application and inspections as part of our service, so you don't have to navigate that yourself.
My neighbor's tree drops limbs on my roof, and I'm worried about the property line. What should I do?
That's a common situation in Highland with the older lots and mature trees. If a limb from a neighbor's tree damages your roof, your insurance may cover the repair, and the neighbor's policy may come into play depending on the circumstances. We can document the damage with photos and a written report for your claim. If you're in an HOA, check the CC&Rs first, because some associations have rules about tree maintenance and roof color changes.
Are you fully insured for work at my Highland property?
Yes. We carry general liability insurance and workers' compensation coverage for our crew. We're happy to provide a certificate of insurance before we start, and we recommend asking any contractor you hire for the same.
What should I do to get my metal roof ready for summer in Highland?
Late spring is a good time to walk the roof and check for loose fasteners, cracked sealant around flashing, and any debris piled up in the valleys or behind chimneys. The UV out here is brutal, and it dries out sealant faster than most homeowners expect. A quick inspection and a few tube of sealant can save you a leak call in August. We offer free inspections if you want a professional eye on it.
Why choose us?

Trusted professionals in Riverside

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Riverside

All your work handled by qualified professionals in Riverside

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

311+ Verified Client Reviews in Riverside

⭐⭐⭐⭐⭐ 4.9/5 · 311 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Riverside · Response within 24h · No commitment · ☎ (951) 783-4287

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Riverside ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm