Serving the Riverside area  ·  (951) 783-4287  ·  Open Mon-Sun 7am-7pm
📞 (951) 783-4287 Free Quote

Metal Roofing in Grand Terrace, CA (92313) · Local Professionals

Riverside Metal Roofing · Fast response in Grand Terrace and the Riverside area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
🎯 Get a Free Quote 📞 (951) 783-4287
+311Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Grand Terrace sits up on the bench above the Santa Ana River, where the wind hits harder and the sun bakes longer than down in the valley. If you live off Barton Road or up near the hillside streets by Grand Terrace High School, you already know how fast a cheap roof gives up here. The mix of 1950s ranch homes, 1970s stucco two-stories, and newer hillside builds means we see everything from low-slope shingle tear-offs to steep standing seam replacements.

We are Riverside Metal Roofing, based just down the road in Riverside, and we work Grand Terrace (92313) constantly. Whether you are near the Grand Terrace Community Center or up on the ridges where the Santa Ana winds peel back loose panels, our insured crews handle standing seam installation and metal roof leak repair without the runaround.

Metal Roofing in Grand Terrace (92313)

Grand Terrace is not flat valley floor. The city climbs from the river up toward the Blue Mountain foothills, and that grade changes everything. Hillside homes off Mount Vernon Avenue and the streets above Terrace Drive catch steady wind that lifts ridge caps and works screws loose over time. The hot inland sun, regularly over 100 degrees in summer, bakes shingle roofs and dries out sealant around flashing and vents. Older ranch properties closer to Barton Road often have low-pitched roofs with original shingle or shake, and those are prime candidates for a metal retrofit over the existing deck. Tight lots and steep driveways mean we plan material staging carefully, and we always check drainage because water running off a hill has to go somewhere.

Our team has worked on everything from small bungalows near the Grand Terrace Civic Center to larger two-story homes with concrete tile. We know the local building department, we know what the wind does to a poorly fastened panel, and we know how to keep a metal roof tight in this climate.

Our services in Grand Terrace

How a Job Works in Grand Terrace

Step 1: You call us at (951) 783-4287 or request a free estimate online. We schedule an on-site assessment, walk the roof, check the attic if accessible, and look at flashing, fasteners, and drainage. You get a written scope and a clear price before any work starts.

Step 2: Once you approve, we pull the permit if one is required and schedule the crew. In Grand Terrace, tight hillside driveways and HOA rules can affect staging and panel delivery, so we plan that upfront. We protect landscaping, keep the site organized, and install to manufacturer specs so your warranty holds.

Step 3: We clean up every day and do a final walkthrough with you. Magnets sweep the yard for screws, gutters get checked, and we make sure you know how the roof drains and what to watch for. We leave your property clean and the job signed off.

Pricing in Grand Terrace depends on roof size, pitch, access, and condition. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and a retrofit over shingles at $7. Repairs and leak fixes start at $450, screw replacement and re-fastening at $750, and flashing or skylight repair at $600. Coating and painting start at $2.50 per square foot, and gutters run from $9 per linear foot. Hillside access, multiple stories, and the number of penetrations all affect the final number. Call (951) 783-4287 for a free estimate and a realistic figure for your home.

My house is up on the hillside off Mount Vernon Avenue and the wind really hits it. What metal roof holds up best here?
For exposed hillside lots in Grand Terrace, standing seam is usually the best choice because the panels are fastened with concealed clips and there are no exposed screws for the wind to work loose. We also check the underlayment and fastening pattern carefully, because wind uplift is the main failure we see on these ridges.
A storm just peeled back part of my roof near Barton Road. How fast can you get out to Grand Terrace?
We treat storm and wind damage as a priority. Call (951) 783-4287 and we will schedule an inspection as soon as possible, often same or next day depending on volume. We can tarp or secure the area to prevent further water damage while you wait for repairs.
What does a typical metal roof replacement cost for a 1,500 square foot ranch home in Grand Terrace?
For a single-story ranch with a standard pitch, most replacements fall in the range of $9 to $14 per square foot installed, so a 1,500 square foot roof often lands between $13,500 and $21,000 depending on panel type, tear-off, and access. We give you a written price after a free inspection so there are no surprises.
Do I need a permit to replace my roof in Grand Terrace, and how long does it take?
Yes, a full replacement or re-roof typically requires a permit from the City of Grand Terrace Building Department, and inspection requirements vary. We handle the permit application and coordinate inspections. Timing depends on the city workload, so we build that into the schedule and keep you informed.
My neighbor and I share a property line, and my HOA has rules about roof color. Can you help with that?
We can coordinate with your HOA on color and panel profile approvals before ordering materials. For property lines, we stay within your legal boundaries and document the roof edge condition. If there is a shared structure or fence line issue, we will flag it early so you can sort it out with your neighbor.
Are you fully insured for work at my Grand Terrace home?
Yes. We carry general liability insurance and workers compensation coverage.
What maintenance should I do on a metal roof in Grand Terrace between seasons?
Before the fall Santa Ana winds, have us check fasteners, ridge caps, and flashing for looseness. After winter rains, look for debris in valleys and gutters. A quick annual inspection catches small issues before they become leaks, and it is much cheaper than waiting for water damage.

Nearby service areas

📍 Riverside 92506📍 Corona 92882📍 Moreno Valley 92553📍 Jurupa Valley 92509
Why choose us?

Trusted professionals in Riverside

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Riverside

All your work handled by qualified professionals in Riverside

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

311+ Verified Client Reviews in Riverside

⭐⭐⭐⭐⭐ 4.9/5 · 311 verified Google reviews

Emily C.
⭐⭐⭐⭐⭐
EC
Emily C.
Riverside

“Had them put a metal roof on my detached garage out back, about 600 square feet. Crew of three knocked it out in a day and a half and swept the driveway clean before they left. No complaints at all.”

Metal Roof Installation
Robert M.
⭐⭐⭐⭐⭐
RM
Robert M.
Corona

“We wanted to keep the Mediterranean look on the front entry but stop dealing with cracked shingles, so they did a retrofit over the existing roof. Honestly didn't expect it to come out this sharp, the flashing work around the entry is flawless.”

Metal Roof Over Shingles (Retrofit)
James P.
⭐⭐⭐⭐⭐
JP
James P.
Norco

“Our horse barn and adjoining tack room needed a full metal roof, roughly 2,400 square feet of corrugated panel. The crew worked around the horses without any drama and finished in three days. Really grateful they took a rural job like ours seriously.”

Commercial & Agricultural Metal Roofing
Karen T.
⭐⭐⭐⭐⭐
KT
Karen T.
Moreno Valley

“Standing seam on the house, done right. Took about four days for the full roof and the lines are dead straight. Price was fair for the square footage and they didn't try to upsell me on anything.”

Standing Seam Metal Roofing
Lisa H.
⭐⭐⭐⭐⭐
LH
Lisa H.
Jurupa Valley

“Leak around the chimney on our corrugated roof had been patched twice by other guys and kept coming back. These folks re-did the flashing properly and we've been through two rainstorms since with zero drips. Wish I'd called them first.”

Chimney & Skylight Repair
Amanda K.
⭐⭐⭐⭐
AK
Amanda K.
Eastvale

“They came out to redo the gutters and drainage along the back of the house where the metal roof dumps all the rain. Good honest work, though they showed up a couple hours later than the window they gave me. Still happy with the result.”

Gutters for Metal Roofs
Kevin R.
⭐⭐⭐⭐⭐
KR
Kevin R.
Colton

“Full replacement on our steep-slope roof, old panels were rusted through in spots. They tore off, replaced some rotted decking edges, and had the new metal on in under a week. The cleanup was better than any contractor I've hired, magnets run over the lawn and everything.”

Metal Roof Replacement
Chris A.
⭐⭐⭐⭐
CA
Chris A.
Grand Terrace

“Went with stone-coated steel to keep the red tile look the HOA wanted, and I'm honestly surprised how close it matches the neighbors' real tile. Install took five days and the crew walked me through everything at the end. Only gripe is I waited about three weeks for the install slot, but worth it.”

Stone-Coated Steel Roofing
Free Quote

Get Your Free Quote

Metal Roofing in Riverside · Response within 24h · No commitment · ☎ (951) 783-4287

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Riverside ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm