Serving the Riverside area  ·  (951) 783-4287  ·  Open Mon-Sun 7am-7pm
📞 (951) 783-4287 Free Quote

Metal Roofing in Corona, CA (92882) · Local Professionals

Riverside Metal Roofing · Fast response in Corona and the Riverside area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+311Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Corona sits where the 91 meets the 15, and its hillside subdivisions like Sierra Del Oro and the older ranch tracts off Ontario Avenue bake in the same Inland Empire sun that cracks shingles and lifts sealant on every roof in 92882. If your roof is original to a 1970s ranch home or a 1990s two-story in Corona Hills, it has already survived more 100-degree summers than any asphalt shingle was designed for.

Homeowners in Corona call Riverside Metal Roofing because we understand the local mix: tract homes with low-pitch concrete tile, custom homes on graded lots with tight side-yard access, and properties backing up to brushy canyons where embers are a real concern. We are based in Riverside, fully insured, and we know the streets from Green River Road to the Circle City.

Metal Roofing in Corona (92882)

Corona's terrain changes fast. In the older neighborhoods near Grand Boulevard and the Circle City, you have 1950s and 1960s stucco ranches with low-slope roofs and mature citrus trees that drop debris into valleys and gutters. Up in Sierra Del Oro and Corona Hills, homes sit on graded pads with narrow side yards, so panel lengths and staging have to be planned carefully. The dry Santa Ana winds that funnel through the Santa Ana River corridor each fall are the main reason we see lifted ridge caps, separated seams, and missing fasteners on older metal roofs. Summer sun is relentless, and UV degradation is the failure mode that dominates here, not snow or ice. We handle standing seam, stone-coated steel, metal tile, and retrofit over existing shingles where code allows, and we always confirm the layer count before we bid.

Our team has worked throughout Corona and the surrounding Riverside area, from the homes near Mountain Gate Park to the ranch properties out toward Norco. We know which suppliers stock the profiles that pass local HOA reviews and which colors hold up under the hazy valley light.

Our services in Corona

How a Job Works in Corona

Step 1: Call us at (951) 783-4287 or request a free on-site assessment. We inspect the roof, check the attic if accessible, and look at flashing, fasteners, and panel condition. You get a written scope and a straight answer on whether repair or replacement makes sense.

Step 2: Once you approve, we pull the permit through the City of Corona and schedule the work. On tight hillside lots in Sierra Del Oro, we plan material drops and staging to keep the street clear. If your home is in an HOA, we coordinate the design review paperwork and color approval before we order panels. Most residential re-roofs take two to five days depending on size and access.

Step 3: We clean the site daily, magnet-sweep for nails, and do a final walkthrough with you. We do not leave until you have seen the finished roof, the flashing details, and the cleanup.

Pricing in Corona depends on square footage, roof pitch, access, and whether we are repairing or replacing. As a ballpark, metal roof repair starts at $450, leak repair at $450, and screw replacement or re-fastening at $750. Full installation starts around $8 per square foot for corrugated or ribbed panel, $10 per square foot for standing seam, and $9 per square foot for metal shingle or stone-coated steel. Retrofit over existing shingles starts at $7 per square foot where the existing layers and decking allow it. Copper and specialty metals start at $20 per square foot. Coating and painting start at $2.50 per square foot. Every roof is different, so call (951) 783-4287 for a free estimate with real numbers for your address.

My 1970s ranch home near Ontario Avenue has original shingles and a low slope. Can you install metal over them?
Sometimes, yes. California code limits how many layers you can recover over, and low-slope roofs need specific underlayment and panel profiles to shed water properly. We inspect the decking and existing layers first, then tell you honestly whether a retrofit or a full tear-off is the right call for your roof.
A Santa Ana wind event peeled back panels on my roof in Corona Hills. How fast can you respond?
Call (951) 783-4287 and we will schedule an inspection as soon as possible. We can secure loose panels and tarp active leaks to prevent further damage, then provide a written repair scope. Storm and wind damage inspections are free.
What does a typical standing seam metal roof cost for a 2,000 square foot home in 92882?
Most standing seam jobs in Corona start around $10 per square foot, so a 2,000 square foot roof often lands in the low five figures before any tear-off or decking repairs. Pitch, access, and panel length affect the final number. We give you a line-item estimate for free.
Do I need a permit to replace my roof in Corona?
Yes, a full replacement or re-roof typically requires a permit, and requirements vary by jurisdiction. We pull the permit and coordinate inspections. You can check current rules and department contacts on the City of Corona website before we start.
My HOA wants a specific roof color and profile. Can you help with approval?
We work with HOA design review boards regularly in Corona. We can provide product specs, color samples, and installation details for your submittal. We will not order panels until your HOA approves the color and profile in writing.
Are you fully insured for work at my Corona property?
Yes. Your home and our crew are covered.
What maintenance should I do on a metal roof in Corona between 100-degree summers?
Wash off dust and debris once a year, especially if you have citrus or eucalyptus nearby. Check fasteners and sealant around flashing and penetrations each fall before the Santa Ana winds. Clear gutters before winter rains. We offer inspections and coating services to extend the life of your roof.
Why choose us?

Trusted professionals in Riverside

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Riverside

All your work handled by qualified professionals in Riverside

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

311+ Verified Client Reviews in Riverside

⭐⭐⭐⭐⭐ 4.9/5 · 311 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Riverside · Response within 24h · No commitment · ☎ (951) 783-4287

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Riverside ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm